![]() ![]() However, when image quality needs to be very high (for instance when scanning drawings which will be colored) a scanner should be used, with the resolution set at least 300 dpi or higher.Ī scanner may also be used for making pencil line tests as well, although it will typically take longer to scan a set of drawings than to shoot the pencil test with a video downshooter. Video capture is typically used to make fast frame captures for pencil tests. 16" x 9.75", so 16 field paper that has had the top lopped-off so it is cut down to 16.5" x 11" size will run through the Brother's auto-document feeder or fit on the flatbed.) But, for example if you use HD 16:9 aspect ratio your 16 field scannable area will be within an area approx. Standard 16 Field paper is 16.5" x 13.5", which won't quite fit in the auto-document feeder which takes paper up to 17" x 11". For traditional hand-drawn animation our interest in these scanners is that they are relatively inexpensive scanners that can handle full-size 12 Field animation paper. I haven't used it, but I expect it's functions are similar to the MFC 6490-CW scanner. Relatively low-priced for an 11" x 17" scanner. Same general price range as the MFC 6490-CW. *UPDATE - There is now a new model 11 x 17 scanner from Brother, the Brother MFC J651-DW scanner. If you're looking for a relatively low-cost 11" x 17" ADF scanner for your animation drawings then you might want to consider it. Here is Dan's review of the scanner on his site:ĭan is using it with Digicel Flipbook, but this auto-document feed scanner should work with any animation software that has Auto Peg Hole Alignment (such as TVP Animation.) I've personally tested it with TVP Animation and it works fine. At this price you could actually replace it several times over if it broke down before it would cost you as much as the usual 11 x 17 ADF scanners from Epson, Fujitsu, Ricoh, Canon, etc.Īnimation student Dan Caylor first alerted me to the existence of this relatively low-cost 11" x 17" scanner. The Brother MFC-6490 CW scanner is aimed at the small business and home-office user, so I doubt that it is necessarily built to hold up for a long time under heavy-duty feature film or tv production use, but for the student or the independent animator on a tight budget this product at least puts an 11" x 17" scanner within an affordable price range. ![]() Ĭombined with an Auto Peg Hole Recognition system in software such as TVP Animation, Digicel Flipbook, or ToonBoom Animate, this new Brother MFC-6490 CW scanner is a great tool for independent animators or students. However, there is a new 11" x 17" scanner on the market - the Brother MFC-6490 CW scanner - which retails for about $299.00 (although I've seen it for as low as $199.00 - to -$219.00 after a mail-in rebate).Īs you know if you've priced out an 11 x 17 scanner, until now this was really unheard of to find such an inexpensive 11 x 17 size scanner which can handle full-sized 12 Field animation paper fed through an Auto-Document Feeder (ADF) for very fast scanning. ![]()
0 Comments
Leave a Reply. |